PPRAH-525D** 25 ft. Square Aluminum Pole

Height: 25 ft Wall Thickness: 0.188″

Square: 5″ Pole Shaft The pole shaft will be constructed of a seamless extruded tube of 6XXX Series Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld.

Finish Options: 02 = Satin Aluminum BA = Black Powder Coat BH = White Powder Coat BW = Dark Bronze Powder Coat BV = Dark Green Powder Coat GC = Gray Powder Coat

Base Style: 4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Snap-In Bolt Covers.

Pole Cap: Aluminum with Stainless Steel Screws (Tenon Option Available – See Mounting Designation)

Anchorage: Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10”) of thread end will be galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Hand Hole Covers: 4-5” Butt Square -2″ x 4″ Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC Grounding Provision is provided opposite the Handhole. 6″+ Butt Square – 3″ x 5″ Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self- Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC Grounding Provision is provided opposite the Handhole.

Fixture Mounting Options:

1 Lamp	2 Lamps 180°	2 Lamps 90°	3 Lamps 90°	4 Lamps 90°	2 3/8 Tenon	Pole Cap
DM1	DM2180	DM290	DM390	DM490	T238	Pole Cap