PPRTAH40F9B4** 40 ft. 9″ Butt Diameter, 0.250 – Round Tapered Aluminum Pole

Height: 35 ft
Wall Thickness: 0.250
Top OD: 4.5″
Bottom OD: 4.5″
Bolt Circle: 12.5″ – 14″
Base Square: 12.75″
Bolt Projection: 2.75″
Anchor Bolts: 1″ x 36″ x 4″

Pole Shaft
The pole shaft will be constructed of a seamless extruded tube of 6063 Series Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld.
Finish Options
02 = Satin Aluminum
BA = Black Powder Coat
BH = White Powder Coat
BW = Dark Bronze Powder Coat
BV = Dark Green Powder Coat
GC = Gray Powder Coat
Base Style
4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Bolt Covers. Square base cover optional. Square base covers only available with powder coat finishes. Not available with satin aluminum finish.
Pole Cap
Aluminum with Stainless Steel Screws (Tenon Option Available – See Mounting Designation)
Anchorage
Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of threaded end will be galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.
Hand Hole Covers
4″-5″ Butt Diameters – 2″x 4″ Handhole with curved Lap Style Aluminum Door and two (2) SS Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC hole is provided.
6″ Butt Diameter – Reinforced, 3″ x 5″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. A Grounding Provision incorporating a 3/8″ diameter hole is provided opposite the Handhole.
7″+ Butt Diameters – Reinforced, 4″ x 6″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. Reinforced Frame will contain a tapped 3/8″-16NC Grounding Provision.